Septic Tank Inspection for Properties in Reston, VA
For residential and commercial properties throughout Reston, VA that have a septic system, it’s very important to get a septic tank inspection on a consistent basis. Why should you at least get a septic system inspection every year?
It isn’t uncommon for some properties throughout Reston, VA to not be hooked up to the municipal sewer system. So, a septic tank is the only way they can treat and dispose of wastewater. How does a septic tank work? Inside the tank, solid waste will partially break down into sludge where it will separate from the water and scum. From that point, the water can exit the tank into a drain field where it will be naturally filtered by bacteria before it enters the groundwater. Because this is the process, it means your tank will need to pump out the built-up sludge and scum that’s in the tank. It is crucial that none of this enters the drain field.
Because many properties rely on a septic system, it’s critical that you stay up to date on the condition of your septic tank. Great Falls Septic Service is ready to provide you with a septic system inspection in Reston, VA. We’re the ones to call for all your septic needs.
When Should I Get a Septic System Inspection?
It’s not a bad idea to get your septic tank inspected at least once a year. If you’re buying a home with a septic system, you should ask about getting an inspection before you buy the house if one hasn’t been done recently.
The Septic System Inspection Process
At Great Falls Septic Service, we have a complete process when it comes to septic system inspections. This is what you can expect during the septic inspection process:
- Finding the Tank On Your Property – When you’re not certain about the location of your septic tank, one of our technicians will be able to help you find it. If you happen to have the original permit for your tank, our technician can look it over since it normally has a map of where your septic tank is located. We also have other tools to help you find your septic tank. Things like a probe rod or radio transmitters. The transmitters can be flushed down the toilet where they’ll go in your tank. Then we can pinpoint the location.
- Analyzing the Level of Sludge – To get a sense of how much sludge is in the tank, we use a sludge testing tool, which is a long-calibrated rod that tells us where the level of sludge is at. The sludge testing tool is a hollow, transparent rod with a plug at the end. It allows the wastewater to come in and trap the sludge and keeps it from exiting the rod. The rod gets dipped into the tank until it reaches the bottom. Then it gets brought back up to the surface. The rod collects the contents inside of the tank, and then our technician can inspect the conditions of the tank. This will help them determine if your septic tank needs to be pumped out.
- Checking for Leaks – While we’re doing your septic system inspection, we will look to see if your septic tank is watertight and free from any leaks. Leaks can be a huge issue. If your septic tank does have leaks, it could potentially contaminate the surface and groundwater, which poses a health hazard. Leaks could also impact the time it takes to discharge clean wastewater into your drain field. We can look for leaks by using vacuum and hydrostatic testing. To do this, your septic tank will need to be emptied before the process begins. Once it’s cleared out, our technicians will pump negative pressure or water to find any leaks in your septic system.
- Inspect the Baffles – The reason you have baffles is to reduce the entry of wastewater into the drain field to prevent any sludge and scum from entering. So, you could say the baffles play a crucial role in your system. This is why during our septic system inspection we will check out the baffles to make sure they are functioning properly. Baffles can experience wear, tear, and corrosion over time, so we’ll just inspect them to see what condition they’re in and replace them if necessary.
- Check Your Filters and the Water Flow – Checking the effluent filter is also a really good idea and important during a septic system inspection. The part also stops solids from entering the drain field. We’ll look at it to make sure the filter is working properly. If it isn’t, then our technicians can replace it. While we’re inspecting the effluent filter, we will also check out the water flow in and out of the tank. Inspecting the water flow can help us determine what kind of issues could be there such as leaks or backflow.
Contact Us Today for a Septic Tank Inspection
If you can’t remember the last time your septic tank was inspected, then you need to call the experts from Great Fall Septic Service. We’ll do a thorough septic system inspection for your property in Reston, VA. Get in touch with us today at 540-545-7075.
We service the following cities and their surrounding areas:
Northern Virginia, including Great Falls, Herndon, Reston, Alexandria, Fairfax, Vienna, McLean, Chantilly, Centreville, Fair Lakes, Hayfield, Mason Neck, Hollindale, Fairfax Station, Dranesville, Clifton, Greenbriar, Oakton
Clarke County, including Berryville, Boyce, Bethel, Double Tollgate, Lewisville, Millwood, Saratoga, Swimley, White Post
Frederick County, including Winchester, Middletown, Stephens City, Brucetown, Clear Brook, Cross Junction, Gainesboro, Greenwood, Jordan Springs, Kernstown, Lake Frederick, Mount Pleasant, Opequan, Round Hill, Shawnee Land, Star Tannery, Stephenson, White Hall
Loudoun County, including Aldie, Arcola, Ashburn, Bluemont, Chantilly, Hamilton, Leesburg, Lovettsville, Middleburg, Purcellville, Round Hill, Sterling, Waterford